Different Types of Roofing Materials

Not long ago, asphalt shingles, slate, clay or concrete tiles were about the only roofing options. Today, advanced roofing materials provide an extraordinary range of alternatives, as well as new aspects for current materials.

Here is a list of different types of roofing to consider for your next re-roofing job:

1. Solar tiles

Advanced solar collectors incorporate flawlessly into existing shingles, generating up to 1 kilowatt of energy per 100 square feet. They’re particularly good for sunny roofs in homeowners’ associations that forbid typical solar panels. While they may help offset energy costs with solar power, they also cost more than traditional solar options.

2. Asphalt shingles

Asphalt shingles are the most common roofing materials in America because they’re effective in all environmental conditions.

3. Metal roofing

Metal roofing comes in vertical panels and lasts about 60 years. Metal excels at sloughing off heavy rain, won’t burn and resists high winds. It is lightweight and can be installed over existing roofs. However, metal can be noisy during rainstorms, and may dent from hail. Corrosion also varies by material.

4. Stone-coated steel

Interlocking panels mimic slate, clay or shingles and resist damage caused by heavy rains (up to 8.8 inches per hour), and winds of 120 miles per hour, uplifting, hail and freeze-thaw cycles. Consequently, they’re an economical, effective choice for wet, windy regions or areas prone to wildfires. Some stone-coated steel roofs are warranted for the lifetime of the house.

5. Slate

Slate roofing lasts more than 100 years. It won’t burn, is waterproof and resists mold and fungus. Slate is effective in wet climates but is expensive, heavy and may be easily broken when stepped on. Keep this in mind if you live in an area that experiences hail.

6. Rubber slate

Rubber slate looks natural and can be cut with a knife to fit intricate roofs like those found on Victorian homes. Rubber slate roofs can last 100 years but can be damaged by satellite dishes and walking – so may also be susceptible to damage by hail, similar to slate. Roofing professionals that are trained to install rubber slate may be hard to find.

7. Clay and concrete tiles

Clay and concrete roof tiles can withstand damage from tornadoes, hurricanes or winds up to 125 miles per hour and even earthquakes, according to "A Summary of Experimental Studies on Seismic Performance of Concrete and Clay Roofing Tiles" by the University of Southern California for the Tile Roofing Institute. They are good in warm, dry climates. They may require extra support to bear their weight, and they are likely to break when walked on.

8. Green roofs

Green roofs are covered with plants and can improve air quality, reduce water runoff and insulate homes to reduce urban heat islands. However, they need extra structural support, a vapor barrier, thermal insulation, waterproofing, drainage, water filtration, soil, compost and plants. Their estimated lifespan is 40 years.

9. Built-up roofing

This heavy roofing consists of layers of asphalt, tar or adhesive topped with an aggregate and is only for flat roofs. Tar and gravel roofs, also for flat roofs, are best for roof-top decks with heavy foot traffic. These roofs may become sticky in summer, and it is harder to shovel snow off of these roofs when compared to smooth surfaces. They can last 20 to 25 years.

 

The best type of roof for you really depends on your climate, budget and house. To see what’s best in your area, talk with licensed roofing contractors and look at some of the newer developments nearby to get ideas on what type of roofing material to use.

Regardless of what type of roof you go with, there is always a chance it can be damaged. Roofing can be expensive, so you want to make sure you’re covered when the unexpected happens. Find out how Better Roof Replacement from Nationwide can help protect your home.

Ref: https://www.nationwide.com/lc/resources/home/articles/types-of-roofing